12 octobre 2012 ~ 0 Commentaire

About Rotary Screw Air Compressors

The industrial rotary compressors are used in many manufacturing companies. There are many ideas to prepare for the kind of cold winter air, the place was in relation to these compressors. Maintenance simple type can help mistakes and challenges that come with the cold during the winter.

Some people think that because the compressor in the building means that is not affected by the temperatures that exist outside. This idea is wrong, because the type of oil cooler is usually placed outside the building. A small amount of oil from the interior of the refrigerator can be trapped is exposed to cold air, and it is thick, the movement is very difficult. Some types of screw air compressor, rotary screw, and bypass valves have oil heat in the cooling system. This provides protection to parts of the compressor during start-up in cold weather.

It is important to check the instrument regularly to ensure that it is. In perfect condition Type of synthetic oil can help, as you very easily when driving at very low temperatures, such as exposed. However, the real challenge is the accumulation of water in the sump accumulates, due to the fact that water does not boil and evaporate and the compressor operated at 140 degrees. Complications caused by the accumulation of water can easily by draining a little oil from time to time during the winter b be avoided prior to the start of the compressor caused.

Extremely cold temperatures condensation can on the lines of the screw rotary compressor. This can cause sensors to send the wrong signals to control. As a result, the compressor will operate at full load up to persistently high performance valves.
The derivatives are selected from the removal position outside the premises. In the cold season, the lines tend to be clogged due to accumulation of ice forces the condensate exhaust system. If drainage is not done correctly, can do some damage in some parts of the compressor.

It is common for many companies to tell their industrial compressors for the service during the winter season. This movement is, as long as you take extra precautions for air compressors winter. This service includes oil and filter change. The oil that has been used can generate an acid, which causes little damage to the bearings in the compressor part and the motor. It is important to turn the engine over by hand and make sure that the cuff be lubricated. go here

Laisser un commentaire

Vous devez être Identifiez-vous poster un commentaire.

Moregetloan |
Mon blog |
Usaloancash5 |
Unblog.fr | Créer un blog | Annuaire | Signaler un abus | Geekweb
| Moneycentergo
| 3cg3technologie